A, product features and uses
LYTS-01TiO2 catalyst is a catalyst for sulfur recovery effect of TiO2 radical anti sulfate. The catalyst is compared with the AL2O3 based catalyst is currently theindustry to promote the use of, has the following characteristics:
Firstly, the organic sulfur hydrolysis reaction and H2S and SO2 Claus reaction has high catalytic activity, almost reach thermodynamic equilibrium.
Second, the "O2 leak" poisoning is not sensitive, hydrolysis resistant "O2 leak"poisoning ability is 2000PPm, Claus reaction is as high as 10000PPm, and onceruled out the effects of high concentration of O2, activity was almost completely restored.
The, to achieve the same conversion level, allowing shorter contact time about 3seconds, the equivalent of 100012000h-1 airspeed, thus can reduce the reactor volume.
The performance of LYTS-01 catalyst and matters needing attention are as follows:
Index two, product
The colour and shape of the white strip type
Outline dimension (mm) - 4 ± 0.5 × 5-20
TiO2% >83
The specific surface area (m2/g) >100
Bulk density (kg/L) 0.951.05
Crushing strength (N/cm) ≥ 120
The wear rate (%) <1.0
In layered loading when in use, the LYTS-01 catalyst loading in the lower part ofthe first reactor bed temperature higher, about the total bed volume 1/3 ~ 1/2, in order to facilitate the hydrolysis of organic sulfide.
Three, packaging, transportation and storage of catalyst
Packaging made of hard board barrel LYTS-01 catalyst, lined with plastic bag (or according to user requirements packaging). The catalyst should pay attention to moisture, avoid rolling in the process of transportation, collision, intense shock,should rain facilities. The catalyst should be stored in dry and ventilatedwarehouse, to prevent contamination and moisture.