A, product features and uses

LYT - 510 is activated alumina as carrier, add special active components in themodel, hydrolysis agent under room temperature conditions used, hydrolyticremoval suitable for synthesis gas, natural gas, oil and gas, gas, coal gas,transformation of gaseous hydrocarbons, liquid hydrocarbon, liquefied petroleum gas in the process gas COS. LYT - 510 to COS for H2S hydrolysis and removal,also have the ability to remove some of the CS2, chloride and hydride. In 55 - 110 ℃ to COS conversion rate can reach 95%, and our other fine desulfurization agentcombination may cause the total sulfur system below 0.1PPm, achieve fine desulfurization effect.

Reaction principle:

COS+H2O=H2S+CO2+35.53KJ/mol

CS2+2H2O=2H2S+CO2+32.66KJ/mol

Index two, physical properties:

Appearance: white spherical

Specification: ¡Ó 3 ~ 5mm

Bulk density: 0.55 ~ 0.70Kg/L

Compressive strength: ≥ 40N/

Surface: 80 ~ 150m2/g

The COS conversion rate: 95%

Three, the normal conditions of use:

Temperature: 55 ~ 110 ℃

Pressure: pressure ~ 8.0Mpa

Air speed: 1000 ~ 2000h1

The height of the bed / tower diameter > 2 (the height of bed layer > 1.0m)

Four, packaging and storage

Woven bag with 1, LYT - 510, lined with plastic bag, prevent moisture absorptionand chemical pollution.

Avoid scrolling should be 2, in the process of transportation, collision and vibration,so as to avoid crushing.

3, good packaging products should be stored in dry warehouse, can not be in contact with other chemicals, to prevent pollution, damp and broken.